OM-130P

Especificaciones

 
OM-150P OM-130P OM-60P
CPU 32-bit
Drive Digital Servo Motor
Cutting Area Guaranteed 3m x 1,530mm 3m x 1,220mm 3m x 595mm
Parameters 32m x 1,530mm 32m x 1,220mm 32m x 595mm
Loadable Film Width 1,700mm ∼ 187mm (57″) 1,390mm ∼ 106mm (55″) 762mm ∼ 150mm
Max Cutting speed 1,131mm/sec(Diagonal), 800mm/sec(Axis)
Cutting pressure 30~500gf
Min. Character size 5mm(depends on material and font selected)
Mechanical resolution 0.005mm
Programmable resolution SP-GL:0.25mm, 0.1mm, 0.05mm, 0.025mm, 0.125mm
Repeatability Plotter mode : ±/0.1mm, Cutter mode : ±0.2mm
Perpendicularity 1.5mm/1,530mm 1.5mm/1,220mm 0.5mm/595mm
No. of cutters / pens 1 piece / 1 piece
Type of cutters  /  pens Cutter blade : Special steel / Pen : Ball type
Interface RS-232C Serial, Centronics Parallel and USB
Buffer capacity 4MB
Command sets SP-GL (HP-GL™) Compatible
LCD display size 20 Characters 2 Lines
Power requirements 85∼260V AC, 50∼60Hz(Free Voltage)
Power consumption Within 160VA Within 120VA
Operating environment Recommended temperature : 10~35℃  /  Recommended humidity : 35~75%
Dimensions With stand 1,965mm(L) x 618mm(W)
x 1,096(H)mm		 1,583mm(L) x 618mm(W)
x 1,096(H)mm		 899mm(L) x 275mm(W)
x 237(H)mm
Without Stand 1,963mm(L) x 316mm(W)
x 253(H)mm		 1,583mm(L) x 286mm(W)
x 253(H)mm		 –
Weight With stand 49 Kg 45 Kg –
Without Stand 33 Kg 29 Kg 13 Kg